Stair Molds
Stair Molds for straight elements
Fixed or adjustable versions
The use of precast concrete stairs is indispensable in modern residential and industrial construction due to the reduction in construction time.
Our fixed, manually and hydraulically adjustable stair formwork systems allow both individual production and mass production. They are available in horizontal or vertical versions and are suitable for the production of prefabricated staircases, taking into account static specifications, technical regulations and planning requirements.
- Upright or horizontal stair formwork with fixed rise and step dimensions
- Upright or horizontal stair formwork with synchronous adjustment mechanism for rise and step dimensions
Adjustable Stairmold
Manual or hydraulic adjustment
Adjustable stair formwork for straight stairs
Individual precast concrete stairs. Formwork with manual or hydraulic adjustment for the production of stairs with smooth steps and soffit. Due to the fast and precise installation of landings at any step and the horizontally movable and height-adjustable back wall, all common stairs can be produced in one formwork.
Step Adjustment
- Single step adjustment or synchronous adjustment of all steps
- Higher pitch possible for starting step
- Variable tread thickness
Step edge exchangeable
- Rounded or chamfered step edge
- Right-angled step edge
- Backcut
Modular Configuration
- Variable number of steps
- Optionally with extension platforms
- Optionally with central divisor
Five-sided formwork smooth
- Visible sides in exposed concrete quality
- Flexible repositioning for left and right-hand staircases
- Staircase tread thickness can be individually adjusted
Technical Data
Min / Max step width | 120 / 150 cm |
Standard number of steps | 11 |
Min / Max number of Steps | 1 / 24 |
Step height | 15 - 20 cm |
Step depth | 20 - 32 cm |
Thickness of thread | 13 - 20 cm |
Fixed Stairmold
fixed dimensions
Upright or horizontal stair formwork with fixed riser and tread dimensions
For larger quantities of the same stair design, stair formwork is advantageous as fixed shuttering. The formwork is arranged either horizontally or vertically for the maximum number of steps and stair width. Smaller stairs with the same geometry can also be produced in the formwork by shutting them off.
Technical Data
Min / Max step width | 120 / 150 cm |
Standard number of steps | 11 |
Min / Max number of steps | 1 / 24 |
Step height | 15 - 20 cm |
Step depth | 20 - 32 cm |
Thickness of thread | 13 - 20 cm |
Or upon your requirements |